Ref. 176 7 1 6 7 ..lauridsenindustri Denmark ..lauridsenindustri 2 PIECES BALL VALVE PN63 Model/Ref 176 KNIFE GATE VALVE PN10 METAL / METAL TIGHTNESS
CMO Knife Gate Valve Type quot;A1quot;, with Cast Iron Body, Stainless Steel 304 Knife, Metal to Metal Seat and Syntered/PTFE Packing, Rising Stem with Hand Wheel, for Flange PN10, DPmax= 7bar, DN200
+ knife GATE VALVE I Glofa offer a broad line of universal knife gate valves covering resilient seat and metal to metal seat, ends connection in wafer, flanged and fully lugged which are widely used PN6, PN10, PN16, ANSI Cl125 amp; Cl150 Ends Connections available in Wafer ends, Semi lug, Lug type, or Double Flanged,
The knife gate valve, also known as slurry gate valve, is a special parallel gate valve that is designed to handle slurry, including fibrous material. It has a sharp edge on the bottom of the gate to shear particulates or other solids in suspension as well as to separate slurry.
Red Valve Red Valve is the trusted global leader for innovative, manufactured pinch valve products, elastomers and engineered systems. Since 1953, Red Valve has set the standard for solving the worlds toughest flow control challenges through unmatched elastomer design and manufacturing experience.
Knife Gate Valve, Pn10 Knife Gate Valve, Semi Lug Knife Valve manufacturer / supplier in China, offering Pn10 Semi Lug Knife Gate Valve, Class 150 Segment Ball Valve with Pneumatic Actuator, Stainless Steel Knife Gate Valve for Water Treatment and so on.
GATE VALVES amp; KNIFE GATE VALVES 620102/01 GATE VALVE PN16/PN10 FLANGED ENDS DESCRIPTION Nodular cast iron body gate valve with Rg5 trim. Non rising stem with open/close indicator and bolted bonnet.
TECHNICAL REQUIREMENT Design and Manufacture Conform to BS5150 1990 Flange dimensions Conform to DIN PN10 Face to Face dimensions Conform to EN558 1
knife gate valve pn10/16 temp 20 to +70 c dn50 to dn300 larger diameters available seat bolt packing gland nut bolt pin yoke stem yoke nut bearing nut material high strength stainless steel stainless steel304/316 nbr stainless steel304/316 ptfe high strength stainless steel stainless steel304/316 stainless steel304/316 stainless
Min and max Temperature Ts + 0176;C to + 180176;C with PTFE seat ( on request ) Min and max Temperature Ts 20176;C to + 200176;C with SILICONE seat ( on request ) When using powders, inverse flow direction Ref. 170 171 172 KNIFE GATE VALVE PN10 REF. 170 171 172
PTFE amp; PEEK Valve Seat Manufacturing Process Ball Valve Seat Material We have a broad range of valve seat materials to suit your application, have a look at the table below or call us on 01992 515880 to talk to us in more depth about your project.
A wide variety of ptfe gate valve options are available to you, such as gate, stop, and check. MENU . MENU PN10 PTFE seat bevel gear drive rising stem through conduit DN300 A216 WCB PTFE Seat Knife Gate Valve Ceramic Knife Gate Valve Manual Slurry Valve Through Conduit Knife Gate Valve Cast Iron Knife Gate Valve Pneumatic Knife Gate
Challenger Valves is a leading manufacturer, supplier and distributor of valves and actuation, providing products and solutions to the water, mining, power generation, irrigation and general industries.
Our knife gate valves are available with a body of ductile iron and a seat of NBR as standard, and optionally of other materials such as seat of viton, PTFE, EPDM, natural rubber or polyurethane depending on the service medium and the temperature at operation (NBR max. 80 C, PTFE max. 220 C, Viton max. 260 C).
Stafsj246;s knife gate valve XV gives a secure and tight shut off, inde Stafsj246;s valves are modular designed and they can easily be customized with gate, seat and box packings according to is 70 mm for valve with PTFE seats and flange drilling according
Pure PTFE Lined Valves , Gear Operation Flanged End PTFE Lined Butterfly Valve Descriptions Using two pieces valve body structure, only the fluorine plastic lined disc and seat contact the liquid.
China Knife Gate Valve Manufacturer Cast Steel Knife Gate Valves, QT450 Body, EPDM Seated, Size 6 Inch (DN150), Flanged RF Ends, SS304 Gate, PN10.
Knife Gate Valve is designed for isolation, on off applications in corrosive, abrasive liquid applications in Pulp amp; Paper, Mining, Waste Water, Chemical, Petrochemical, Power and Steel. Our knife Gate valves are available as a bi directional resilient seated valve or a unidirectional metal seated valve.
ptfe seat knife gate valve pn10 offers 1,615 48quot; gate valve products. About 83% of these are valves, 1% are pipe fittings. A wide variety of 48quot; gate valve options are available to you, such as water, oil.
WeiSiDun Group. Headquartered in ZhengZhou, which is the geographical center of China, Central Plains hinterland,China's major railways, aviation, highways, electricity, post and telecommunications hub cities, International Air Logistics Center, also an international land port city
KNIFE GATE VALVES AND CHECK VALVES C.M.O. Amategui Aldea 142, 20400 Txarama Tolosa (SPAIN) uni directional knife gate valve. One piece integral cast body with guides to support Viton, Silicon, PTFE etc. Also metal seat available 9 All kind of accesories available Deflector cone, Reinforced socket, Diaphragm, Mechanical Limit Switches
KNIFE GATE VALVE PN10 396891. VALVE CENTER INDUSTRIAL VALVE STOCKIST, ACTUATORS AND RELATED EQUIPMENT Pa rt o 1 Body 2 Seat 3 Slide 4 Gland 5 Packning 6 Packning Bolt 8 Su ort 9 Closur cap 10 Board 11 Closur cap 12 Deflector 13 Board 14
CV6600 h opper shape knife gate valve is used in service as a pneumatic residue discharge valve in pulp making, paper making and sewage treatment. This type of valve is well suited for high consistency media containing solids, fiber or residue, serving as a residue discharge valve on stock cleaners, gravity separators or pressurized screens.
industial valves, ball valves,butterfly valves,non return valves,control valves,gate valves,globe valves,needle valves,flush bottom tank valves,pinch valvesplug valves,pressure reducing valve,strainersdiapgragm valves,knife edge gate valves,ptfe lined valves,sight glassessafety valves,forged fittings and flanges,foot valves, amtech valves, ahmedabad
KNIFE GATE VALVE PN10 Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel + 33 (0) 4126.96.36.199 Fax + 33 (0) 474.95.62.08 Internet ..sferaco.fr E mail [email protected] SS 304 gate, NBR seat, with handwheel Ref. from DN 50 to DN 700 Between flanges GN10 SS CF8M body, Packing (Tress) PTFE PTFE 8(+) Packing ( O ring ) NBR
5 Valve Style Give valve style code as follows Give gate material code as follows KGC = Cast Stainless Steel Knife Gate Valve Ordering To order, simply complete the valve order code from information shown.
Chain wheel knife gate valve with replaceable EPDM/PTFE/metal seat. Chain wheel operation. Replaceable seat. Full bore design, DIN stainless steel rising stem knife gate valve DN400 PN10. DIN WCB knife gate valve with replaceable EPDM/PTFE/metal seat, V port
Stafsj246;s WB14E knife gate valve is a high performance braids and extra PTFE scrapers ensures that no media reaches the Stafsj246;s valves are modular designed and they can easily be customized with gate, seat and box packings according to media and
Phone : 0086 13953560679
Email : [email protected]
WhatsApp : 0086 13953560679
© 2017 Shandong Xinhai Mining Technology & Equipment Inc. sitemap